Bulb spacing : 18cm(part A), 16cm (part B)
Bulb specification: 3V/70mA/0.21Watt
Quantity of Bulb: 180x2=360 bulbs
Water resistant and sustainable to a temperature range of -20 ¡æ to +60 ¡æ
Lamplife: 15,000 hours (depends on condition of application)
1 Make sure that the power is disconnected during installation!
2 Make sure that the power source is the same as the power 220V;
3 Install the supporting pole as the figure A;
4 Put the light branches into the hole on the pole, see figure B;
5 Leave enough space between two piece of Softlight because of heat;
6 Connect the part A and part B with connector attached, see figure C; Figure C
1. Do not plug them into power when the light is still in package;
2. Do not cut the light when it is connected to power;
3. Make proper steps to the connection to avoid shock;
4. Do not cover the light with any objects when application;
5. Do not use the light when the light was damaged;
Figure A Figure B