INSTRUCTION FOR EL-ROPE

Basic Parameter of EL-ROPE:

Diameter: 0.9mm, 1.4mm, 2.2mm, 3.2mm, 5.0mm; Basic color: Blue, Green, Orange, Red, Purple;

Store temperature: - 40 ? -- + 70 ? Store humidity: < 40%

? Example of application: diameter-2.2mm, length-1m EL-rope

* Flectional diameter: >15mm * Pull: < 1kg

* Rotate angel: 30 º *Input voltage: 110v

* Input frequency: 400Hz-5000Hz *Operation temp.: -40 ? - +70 ?

Rated power in different input voltage:

Life of working in different frequency: ( 6hours on, and 18hours off/day)

* The above data is only for reference.

Caution:

1. The life of working depends on the input voltage, frequency and working condition;

2. The brightness will decrease with the working, and up to 30% of original one at the end;

3. Do not expose the EL-rope in the direct sunshine;

4. Do not cut the rope when it is on power;

5. Connect the rope before plugging into power;

6. Do not touch the electrode when it is in power;

7. Guided under the professional electrician when installing and connection;

1.Insulating wrap of the EL-ROPE 2.Electrode of the EL-ROPE (double thin wires) 3.Electrolyte layer of the EL-ROPE 4.Core electrode of the EL-ROPE 5.Welding point 6.Welding point 7.Input source 8.Input source 9.PVC shrink tube (smaller size) 10.PVC shrink tube (larger size) 11.Wrap of power cable

Install of EL-ROPE

Operation of connection:

a. Remove the wrap of EL-ROPE (part 1);

b. Take out the electrode (part 2);

c. Scrape off the electrolyte layer (part 3) on the core electrode (part 4), in order to make the electrode naked;

d. Remove the wrap of Power cable (part 7 & 8);

e. Weld the Power Cable separately with the Electrode of EL-ROPE (part 5 & 6);

f. Coat the welding point with shrink tube (part 10);

g. Coat the connection sector with shrink tube (part 9);